Stainless steel 3 inches long expansion bolt 10mm in diameter with nut and washer for rock climbing routes.
Weight: 55g (1.9 oz)
Length: 80mm (3 inches)
Maximum Torque: 25 foot-pounds
Made in T...
Stainless Steel Bolt Hanger 10mm with blunt, large radius edges to protect the carabiners. The hanger eye takes more than one carabiner.
Breaking Strength: 30kN
Weight: 52g (1.8oz)
Made in Taiwan
Stainless steel quick link for equipping anchors, setting up rappels, fixing quickdraws, or as an emergency back-off option. The 8mm quick link requires a 14mm open-end wrench.CE Certified: CE 0321...
Stainless Steel multi-point belay station with more clip-ins along the chain, hangers, and ring. The 2 bolt hangers holes take 10mm and 3/8inch expansion bolts.
CE certified stainless steel oval quick links for setting up rappels, equipping anchors and fixing quickdraws. Requires a 14 mm open-end wrench.
Size: 8mm
Weight: 76g
Lock Type: Screw GateMaterial...
Stainless Steel Bolt Hanger 10mm with inner ring diameter of 35mm and outer diameter of 55mm. The hanger ring takes more than one carabiner.
Breaking Strength: 30kN
Weight: 140g (5oz)
Made in Ta...
The GrandWall stainless steel rappel ring helps you retrieve your climbing rope at the end of a rappel and ensures your rope pulls free from the anchor; works with slings or chain anchors.
Note: No...
When placed properly in good stone glue-in bolts are the strongest anchors available. Patience and experience are required when installing glue-in bolts. The mixing and installation of the glue is ...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
